When it comes to cleaning of boats, some boat owners believe in overdoing it. Of course, in their opinion, they do it right and not overly. But they tend to forget that they spend more time in cleaning their boat than fishing or cruising in them!

Although you should certainly keep your vessel clean, you don’t need to spend most of your time in doing that.

If you have just the right products and tools, cleaning your vessel once in a while is efficient and sufficient. It’s important to clean your boat “smarter” and not “harder”.

In short, building an effective cleaning schedule and making it a habit after each trip on the waters will keep your vessel look like new for years. Here are a few useful tips.

1. Your Cleaning Equipment Should be Right

Your cleaning equipment should be according the type of boat you have if you are planning to car transport Perth to Melbourne according to Dazmac Logistics. Make sure you choose sturdy cleaning brushes that are capable of cleaning stubborn dirt, salt and grime, without damaging the gel coating of your vessel.

The handle of the brush should be long and sturdy so that it will reach hard-to-clean corners without straining your arms and back.

Don’t choose a very rough brush or else it will damage your boat’s coating. For most applications, a medium-soft brush works fine.

Make sure the bristle material is sturdy enough to stand recurrent use, cleaning agents, saline water and sun exposure.

Apart from a good brush, you’ll need a mop, sponges, washing pads, a bucket that should be large enough to accommodate your brush, towels and chamois cloths.

Once you get all these items, store them in a same, specific place, to avoid the hassle of searching them every time.

2. Find an Environment-friendly Soap

If you sail on oceans, you will need a tough soap to remove salt, dirt, grime and fish blood easily, but it should be environment-friendly.

Instead of choosing the same soap you use at home for cleaning dishes, choose a bio-degradable soap with a neutral pH. Make sure you follow all the instructions on the pack of the cleaning agent.

3. Start Cleaning Easily and Efficiently

If you have the right equipment, your cleaning job should not be hard or tiring, but it should be easy yet efficient.

Before starting cleaning with your cleaning agents, consider giving your boat a thorough rinse with water. Never scrub a dry vessel because that will damage your boat’s coat.

Similarly, never apply soapy water to the entire boat at once because till you reach the other end for scrubbing, the soapy solution there will get dried up. So, work on sections.

4. Soak with Chamois Cloths

Once you finish cleaning, your wet boat should be wiped with soft cloths without scrubbing. This should be done right after washing and rinsing in order to avoid “spotting”.

5. Apply High-quality Wax

Once the boat is completely dried, a high-quality wax and buff should be applied on it to shine and protect the fibreglass.

You don’t need to wax the boat after every use, but you should do it minimum once or twice in the season. It will maintain the lustre of the hull and provide protection against the impurities and elements.

Apply several coats of wax.

6. Glasses and Perspex Windows

For cleaning glass, a water and vinegar solution is a great cleanser and it’s environment-friendly too.

If your glass and Perspex windows have a lot of scratches, they can’t be repaired much. You should protect them from scratches in the first place with the help of a clear silicon spray or polish and clean them with a soft, smooth cloth.

Hiring an American boat imports with Dazmac Logistics is easy too. But you will have to keep your craft clean once it arrives to you. Use the above tips and keep your boat shining and new-looking always.